We promise that the Boombrush is your last toothbrush ever, but of course you have to use and care for it properly. That's why you can find everything you need to know about your Boombrush here.
Use the Boombrush like a normal toothbrush with a slight angle against the gums (± 45°) and avoid too much pressure. It may take a few days to get used to the technique, but after that you will not want anything else.
Tip: Don't push too hard while brushing
No need to scrub hard! The 40,000 vibrations of the Boombrush provide sufficient cleaning power. Make sure you replace the brush head regularly. Continuing with the same head for too long or pushing too hard will deteriorate the quality. Trust the Boombrush and let it do the work!
A space between the head and the brush transmits the vibrations. The head is therefore firmly attached to the brush. Replace the head every 8 weeks for the best cleaning. Replace the head upright without twisting or bending.
Tip: How to change your brush head
Remove the old brush head straight up to prevent the pin from twisting and reduce vibration. Place the new head upright, making sure it is properly aligned with the button and symbols on the front to maintain optimal vibration.
Press the button briefly to turn the brush on and change mode. It remembers the last mode. Hold the button for 2 seconds to turn the brush on or off briefly. The brush stops automatically after 4x30 seconds. The timer indicates that you can change sides.
Tip: prevent limescale around the brush
After use, it is important to keep the button dry and remove any residue to maintain functionality. Store the brush in a well-ventilated, dry place to prevent limescale build-up. This will prevent damage to the button.
Tip: keep the holder clean
To ensure your Boombrush continues to vibrate optimally, clean the space between the holder and the brush head once every two weeks. This prevents the build-up of toothpaste residue and limescale, which can hinder the vibrations. Remove the head from the body, rinse it with water, dry everything thoroughly and put the head back on the body
The battery is approximately 70% charged upon delivery. The indicator turns red when the battery is almost empty, after which it will last for another 2 weeks. If the battery is completely empty (0%), the brush will only switch on again when it is 2/3 full. Charging takes 4-6 hours and the indicator then changes from red to green. The brush cannot be used while charging.
Tip: Only charge it when necessary
When charging, use the cord and a DC 5V 1A adapter, not fast chargers. This is best for the battery.
Then try one or more of the following steps:
Tip: Don't drop your Boombrush
Logical you think, but it does happen. Because you only have to charge the brush 4 times a year, we have omitted a charging station. Place your Boombrush firmly to prevent falling and you can continue to enjoy the brush.
Please note: This product complies with electromagnetic device standards. If you have a pacemaker or other implanted device, consult your doctor before use.
We are happy to help you and are available 24 hours a day on weekdays!
Check the FAQ's for direct answers to your questions.
