Everything about the
Boombrush
We promise that the Boombrush will be your last toothbrush ever, but of course, you need to use and care for it properly. That's why everything you need to know about your Boombrush is right here.
how to brush with
the brush
Use the Boombrush like a regular toothbrush, with a slight angle against the gums (about 45°), and avoid applying too much pressure. It may take a few days to get used to the technique, but after that, you won't want anything else.
Care tip: don't press too hard while brushing
Hard brushing isn't necessary! The 40,000 vibrations of the Boombrush provide enough cleaning power. Make sure to replace the brush head regularly. Using the same head for too long or pressing too hard diminishes its effectiveness. Trust the Boombrush and let it do the work!
how does
the brush work?
A gap between the head and the brush transmits the vibrations. Therefore, the head is securely attached to the brush. Replace the head every 8 weeks for the best cleaning. Swap the head upright without twisting or bending.
Care tip: how to replace your brush head
Remove the old brush head by pulling it straight up to avoid twisting the pin and reducing the vibrations. Place the new head upright, ensuring it is correctly aligned with the button and symbols on the front to maintain optimal vibrations.
the button of
the brush
Press the button briefly to turn on the brush and switch between modes. It remembers the last mode used. Hold the button for 2 seconds to briefly turn the brush on or off. The brush stops automatically after 4 sets of 30 seconds. The timer indicates when to switch sides.
Care tip: prevent scale buildup around the brush
After use, it's important to keep the button well-dried and remove any residue to maintain functionality. Store the brush in a well-ventilated, dry area to prevent scale buildup, thus avoiding damage to the button.
five different
modes
- General brushing mode
- Soft vibrations for sensitive teeth
- Massaging mode for tongue or gums
- Alternating vibrations
- Powerful mode to remove plaque
Care tip: keep the holder clean
To ensure your Boombrush continues to vibrate optimally, clean the connector between the holder and the brush head every two weeks. This prevents buildup of toothpaste residue and scale, which can hinder vibrations. Detach the head from the body, rinse it with water, dry everything thoroughly, and reattach the head to the body.
the battery of
the brush
Upon delivery, the battery is approximately 70% charged. The indicator turns red when the battery is nearly empty, and it will last for another two weeks. If the battery is completely drained (0%), the brush will only turn back on when it reaches 2/3 charge. Charging takes 4-6 hours, and the indicator changes from red to green. The brush cannot be used while charging.
Care tip: charge it only when necessary
Use the provided cable and a DC 5V 1A adapter for charging, avoiding fast chargers. This is best for the battery.
is your brush suddenly
not working?
Try one or more of the following steps:
- Check if the brush head is properly attached to the body.
- Clean it and let it dry completely.
- Hold the button down for 10 seconds to fully discharge the battery.
- Fully charge your brush.
Care tip: don't drop your Boombrush
It might seem obvious, but it happens. Since you only need to charge the brush 4 times a year, we have omitted a charging station. Place your Boombrush securely to prevent it from falling, so you can continue enjoying it.
start with
recycling
You can add a recycling bag to your next delivery with our Repeat subscription to ensure our products are properly recycled and given a new life.
always provided with
repeat
With Repeat, you are always provided with a fresh brush head and enough toothpaste. Adjust your Repeat subscription on the website to suit your preferences. Not using Repeat yet? Activate it now with just one click!
Attention: This product complies with electromagnetic device standards. If you have a pacemaker or other implanted device, consult your doctor before use.